1·Inspecting welding seam of hatch coaming after welding.
货舱口围板焊接后焊缝检查。
2·Inspection welding seam and dimension of cargo hatch cover.
货舱舱口盖焊缝和尺度检查。
3·A tactile sensor welding seam tracing in welding was designed.
设计了一种接触式自动焊缝跟踪传感器。
4·Welding seam performed in prefabrication shop denote with "s".
在预制厂焊接的焊缝，用“S”表示。
5·Welding seam tracking system with linear CCD intelligent image sensor is described.
叙述了一种基于线阵CCD摄像机为传感器的焊缝自动跟踪系统。
6·Nondestructive inspection is an important method which guarantees welding seam quality.
对焊缝进行无损探伤检验是确保焊缝质量的重要手段。
7·The impacts of transverse and longitudinal shrinkage of welding seam on underframe positioning.
以及焊缝横向、纵向收缩对底架定位的影响。
8·A space curve welding seam tracking sys-tem on welding robot with rotating arc sensor is devel-oped.
研制了一套基于旋转电弧传感的弧焊机器人空间曲线焊缝智能跟踪控制系统。
9·Butt contact and angular contact welding seam corrosion detection sensors were designed respectively.
分别设计了适合对接和角接焊缝腐蚀检测的两种传感器。
10·Optimum design scheme of skirt welding seam as well as the suggestion for improvement have been proposed.
提出了裙座焊缝结构优化设计方案和改进建议。
1·After comparing the detecting result and the actual height of metal parts it showed that the detecting error was in the nature figuration error range of one welding seam.
经与实验获得的实际金属结构高度数据对比，得到金属结构高度检测的误差在单道焊缝的自然成形的高度误差范围内的结果。
2·Inspection welding seam and dimension of cargo hatch cover.
货舱舱口盖焊缝和尺度检查。
3·The joint which is connected by welding method is called the welding joint, which is composed of welding seam, fusion zone, heat affected zone and its adjacent base metal.
用焊接方法连接的接头称为焊接接头，它由焊缝、熔合区、热影响区及其邻近的母材组成。
4·Welding seam should be numbered according to pipeline medium set, in principle, main pipe prior to branch pipe.
焊缝编号应根据管线介质流向进行编号，原则上应先主管后支管。
5·Welding seam tracking system with linear CCD intelligent image sensor is described.
叙述了一种基于线阵CCD摄像机为传感器的焊缝自动跟踪系统。